Best Desoldering Wick in 2022 [*Top Picks*]

Looking for the best desoldering wick on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

2098 Reviews Scanned

  • Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Remover Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components
    Bestseller #1
    Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Remover Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components (179)
      🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more 🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs 🌟This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area. 🌟The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency 🌟The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
  • NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098
    Bestseller #1
    NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length (386)
      Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder Available with standard or anti-static bobbins
  • MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1
    Bestseller #1
    MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue (386)
      Oxide-free clean copper Static free bobbins Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004) Manufactured under SPC guidelines Designed to leave a residue that is environmentally safe
  • Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
    Bestseller #1
    Herain No-Clean Solder Wick, Desoldering Braided Wicks with Flux, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components (61)
      1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption. 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board. 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder. 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station. 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
  • AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
    Bestseller #1
    AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool (1735)
      High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
  • TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
    Bestseller #1
    TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8' (198)
      Quality materials:The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder. Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work. Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it. Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
  • Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)
    Bestseller #1
    Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm) (2152)
      What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
  • MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075
    Bestseller #1
    MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green (386)
      Oxide-free clean copper Static free bobbins Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004) Manufactured under SPC guidelines Designed to leave a residue that is environmentally safe
  • SRA No-Clean Desoldering Wick - 3 Pack of 10 Ft. Spools
    Bestseller #1
    SRA No-Clean Desoldering Wick - 3 Pack of 10 Ft. Spools (458)
      10FT SUPER SIZED SPOOLS: 30 Feet of standard width desoldering wick infused with no-clean flux. QUALITY MATERIALS: Impurity-free copper braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures. EASY TO USE: Simply place over work and heat to correct soldering mistakes, remove unwanted solder from parts and terminals and break solder bridges. FAST & EFFECTIVE: Unique gapped-weave coated braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads. PCB SAFE RESIDUES: Leaves very little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
  • TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid
    Bestseller #1
    TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid (198)
      Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand. 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m; width: 2.5mm), Suction Pump Size (length: 21cm). High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable. Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs. Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!
  • Also read Home tooth polisher Also read Lg ubk90 Also read Einparkhilfe nummernschild Also read Friend of the year award

What to Think About When Buying desoldering wick

When you realize you need to buy a quality desoldering wick, you may just go to the nearest store where they are sold. Or use your brain and search for the best-rated desoldering wick online. This research, though, is a thorough work. That’s why you need someone to rate each desoldering wick and come up with conclusions. And this is exactly what we do: choose the best item for your needs and the best store for you to buy it at.

How to Pick the Best desoldering wick: Our Buying Guide & Tips

First, ask yourself: what should I look for in a desoldering wick? If this item is exactly what you need, with its materials, features, size, price, and so on – go on and search for it. If you just want something of a kind, you better look through the available alternatives, as they always exist.

Even when you are certain about the one you want, though, the question is who makes the best desoldering wick offer.

So, what are the potential issues you better avoid?

  • Low quality items. They can be used, damaged, or initially flawed. desoldering wick brands usually withdraw batches that turn out flawed and replace them, but it’s not always the case. How do you know you get what you deserve?
  • Package bundle. Do you get the item with all the accessories it should come with? Does the seller add any extras? Or do they remove something unnecessary to make it cheaper? Awareness is necessary to make the right choice.
  • Overpriced items. Some stores may hope you are too lazy to do the job. This desoldering wick buying guide is here to remind you: you don’t have to pick the first option you see, you can choose.
  • Delivery issues. Not only can it take too long. Shipping may cost too much, your item may be damaged during transportation, and, finally, it can get lost at all. There can be ridiculous mistakes like wrong color or size, if it applies. Of course, you can claim a refund, but can anyone refund your hopes and expectations?

Where can you learn about it all? You can surf through online stores and aggregators, try to analyze reviews and decide whether they are trustworthy, and get tired of it. As an alternative, you can trust our algorithms and let them choose the best desoldering wick for you.

How We Rate Each desoldering wick

How we test each desoldering wick is not a secret. We compare desoldering wick reviews by both users and professional reviewers. It enables us to cover problems that pop up rarely. Doing an original desoldering wick review might be great, but you need to fetch hundreds and thousands of them to get the full picture.

With our AI-based tools, we fetch lots of reviews and rates to compare various desoldering wick offers as well as its potential alternatives. Here are the parameters we use:

  • Product quality and reliability. Of course, the longer the item is available on the market, the more relevant are the marks. It’s hard, for example, to judge the durability when you have just bought it.
  • Brand value. That’s a sort of prediction, but brands usually care about their public image.
  • Features and specifications. What do you get for your money? Will it satisfy you? Are all the necessary features here? Do you have to overpay for features you’ll hardly ever need?
  • Price. As great as it is, even the top desoldering wick on the market can be overpriced.
  • Alternatives. A good desoldering wick comparison to rivals may help you understand why you want exactly this one. Or maybe you will settle for another one that fits your needs even better.

Where do we get this information? Mostly from desoldering wick ratings and reviews on marketplaces and independent aggregators. Prepared and processed, it sifts the best rated desoldering wick offers from the rest. So, with us, you can find the desoldering wick of your dream easy and quick!

Leave a Reply

Your email address will not be published. Required fields are marked *